Hyosung, GenMega: IP
Note: Menu wording vary by model.
1) Change Communication Type:
From the Operator Function Screen (Main Menu) go to:
- Customer Setup =>
- Select Processor =>
- Communication - (TCP/IP)
- Message Format (Either Standard 1- Hyosung format, or Standard 3- Triton Emulation)
- TCP/IP Type (Disable SSL and TLS) / Select (Standard or Visa Frame)
2) Configure for Host IP:
From the Operation Function Screen (Main Menu) go to:
- Host Setup =>
- Host Address 1: 192.168.0.52
- Host Port 1: 8000
- Host Address 2: 192.168.0.52
- Host Port 2: 8000
- URL (Disabled)
Note: Some ATM’s have an Apply button that needs to be pressed to save changes.
3) Configure Terminal IP Addresses:
From the Operator Function Screen (Main Menu) go to:
- System Setup =>
- Terminal IP (Use DHCP)
- If static desired use:
- IP Address: 192.168.0.55
- Subnet Mask: 255.255.255.0
- Gateway: 192.168.0.1
- DNS: 192.168.0.1
- (warning, pictures do not match exactly)
Triton: IP
Note: Please note that wording in menus may vary slightly by model.
1) Change the ATM communication mode from Dial-Up to TCP/IP:
- 6. Configure Terminal => 6. Communication =>
- 8. Communication Protocol: TCP/IP
- 9. Communication Message Format: Triton Standard TCP/IP No CRC or Triton Standard
- 3. Permanent TCP/IP Connection: UNCHECK
- 1. Host IP Address: 192.168.0.52
- 2. Host IP Port: 8000
- F4: Disabled
2) Define TCP/IP parameters for the ATM:
- 2. Diagnostics => 7. Modem /Ethernet => 6. Configure Ethernet Settings
- 6. Enable DHCP: CHECK
- If static desired:
- 1. IP Address: 192.168.0.55
- 2. Subnet Mask: 255.255.255.0
- 3. Default Gateway: 192.168.0.1
- 4. Primary DNS: 192.168.0.1
- (warning, pictures do not match exactly)
3) Restart
- 5. System Parameters =>
- 5.Restart Terminal =>
- Enter
Tranax: IP
Note: Please note that wording in menus may vary slightly by model.
1) Change communication type:
From the Operator Function Menu (Main Menu) go to:
- Customer Setup =>
- Change Processor =>
- Communication =>
- Communication - (Standard TCP/IP or Visa Frame TCP/IP) (Disable SSL and TLS)
- Message Format- (Either Standard 1- Hyosung format, or Standard 3- Triton Emulation)
- TCP/IP Type (Disable SSL and TLS) / Select (Standard or Visa Frame)
2) Define TCP/IP parameters for the ATM
After switching the settings from Modem to one of the TCP/IP selections, other menus will become available and will need to be adjusted.
- Change Host IP Address Input: 192.168.0.52
- Change Host Port Number Input: 8000
- Save settings and continue
3) Configure Terminal IP Addresses
From the Operator Function Screen (Main Menu) go to:
- System Setup =>
- Device Setup =>
- Terminal IP Setup =>
- TCP/IP Mode: DHCP
- If static desired:
- IP Address: 192.168.0.55
- Subnet Mask: 255.255.255.0
- Gateway: 192.168.0.1
- DNS: 192.168.0.1
- (warning, pictures do not match exactly)
Comments
0 comments
Please sign in to leave a comment.