Need Assistance ?
Contact us 24/7 at 1-800-561-8880 or email support@dlpwireless.com . 

Select the ATM manufacturer below for specific nono-SSL/TLS configuration instructions.

• Hyosung
• Triton
• Genmega

Hyosung

Note: Menu wording vary by model.

1) Change Communication Type: From the Operator Function Screen (Main Menu) go to:

• Customer Setup
• Select Processor
• Message Format
  • Choose: Standard 1, or Standard 3 (per your processor)
• (Press Cancel to Return)
• Communication
  • Choose TCP/IP
• TCP/IP Type
  • Type: Standard or Visa Frame (per your processor)
  • SSL/TLS: Disable

2) Configure Host IP: From the Operation Function Screen (Main Menu) go to:

• Host Setup
• Host Address
  • URL En/Disable: Enable
  • Host Address: 1: 192.168.0.52
  • Host Port 1: 8000
  • Host Address 2: 192.168.0.52
  • Host Port 2: 8000

Note: Some ATM’s have an Apply button that needs to be pressed to save changes.

3) Configure Terminal IP Addresses: From the Operator Function Screen (Main Menu) go to:

• System Setup
• Terminal IP
  • DHCP: Enable

• Static - Alternative:
  • System Setup
  • Terminal IP
    • DHCP: Disable
    • IP Address: 192.168.0.55
    • Subnet Mask: 255.255.255.0
    • Gateway: 192.168.0.1
    • DNS: 192.168.0.1
    • (warning, pictures do not match exactly)

Triton

Note: Menu wording may vary by model.

1) Change Communication Type: From the Operator Function screen (Main Menu) choose:

• Terminal Configuration
• Communication
  
  • Communication Protocol: TCP/IP
  • Message Format: TDL TCP.IP
  • Primary Host Address: 192.168.0.52.8000
  • Backup Host Address: 192.168.0.52.8000
  • Permanent TCP/IP Connection: Disable
  • Enable SSL: Disable

2) Configure Terminal IP Address: From the Operator Function screen (Main Menu) choose:

• DHCP – Preferred 
  • Diagnostics 
  • Modem / Ethernet 
  • Configure Ethernet Settings
    • o Enable DHCP: Enable 
    • o Primary DNS: 192.168.0.1 

• Static – Alternative 
  • Diagnostics 
  • Modem / Ethernet 
  • Configure Ethernet Settings o Enable DHCP: Disable 
    • IP Address: 192.168.0.55 
    • Subnet Mask: 255.255.255.0 
    • Default Gateway: 192.168.0.1 
    • Primary DNS: 192.168.0.1

Genmega/Tranax

Note: Menu wording may vary by model.

1) Change Communication Type: From the Operator Function screen (Main Menu) choose:

• Customer Setup
• Change Processor
  • Communication: Standard TCP/IP
  • Message Format: Standard 3 
• Processor Option
  • Reversal on Host Error: Enable

2) Configure Host IP: From the Operation Function screen (Main Menu) choose: 

• Host Setup 
• Host IP Address o Host IP Address #1: 192.168.0.52 
  • Host Port #1: 8000 
  • Host IP Address #2: 192.168.0.52 
  • Host Port #2: 8000 

3) Configure Terminal IP Address: From the Operator Function screen (Main Menu) choose: a)

• DHCP – Preferred o Change TCPIP Mode: DHCP
  • System Setup
  • Device Setup
  • ATM TCP/IP Settings
    • Change TCPIP Mode: DHCP

• Static – Alternative 
  • System Setup
  • Device Setup 
  • ATM TCP/IP Settings
    • Change TCPIP Mode: Static
    • Change IP Address: 192.168.0.55
    • Change Subnet Mask: 255.255.255.0
    • Change Default G/W: 192.168.0.1
    • Change DNS Server: 192.168.0.1